Aniline
Synonyms: Phenylamine, Aminobenzene
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Chemical Name
Aniline
Product Form
Substance
Catalogue No.
AL0145A
CAS Number
62-53-3
EC Number
200-578-6
EC Index Number
612-005-00-5
Grade
AR grade
HSN Code
29214110
Molecular Formula
C6H5NH2
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
Chemical Name
Aniline
Catalogue No.
AL0145A
Product form
Substance
CAS Number
62-53-3
EC Number
200-578-6
Grade
AR grade
EC Index Number
612-005-00-5
Chemical Formula
C6H5NH2
HSN Code
29214110
Synonyms
Phenylamine, Aminobenzene
Chemical Structure
-
1.2 Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture
Used in the manufacture of dyes, pharmaceuticals, and as a solvent.
Uses advised against
Not specified
1.3 Details of the supplier of the safety data sheet
Company identification
Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 Emergency Contact Details
Phone / e-Mail
Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
SECTION 2: Hazards identification
2.3 Other hazards
Other hazards
May cause respiratory irritation and central nervous system effects.
SECTION 3: Composition/information on ingredients
3.1 Substance
Name
Aniline
CAS No.
62-53-3
SECTION 4: First aid measures
4.1 Description of first aid measures
First-aid measures after inhalation
Move to fresh air. If breathing is difficult, give oxygen. Seek medical attention.
First-aid measures after skin contact
Wash with soap and water. Remove contaminated clothing. Seek medical attention if irritation persists.
First-aid measures after eye contact
Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Seek medical attention.
First-aid measures after ingestion
Do not induce vomiting. Rinse mouth and seek medical attention immediately.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms relating to use
Headache, dizziness, nausea, skin irritation.
4.3 Indication of any immediate medical attention and special treatment needed
General information
Treat symptomatically. Show this safety data sheet to the treating physician.
SECTION 5: Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
Water spray, carbon dioxide, dry chemical powder, foam.
Unsuitable extinguishing media
Not specified
5.2 Special hazards arising from the substance or mixture
Special procedures
Toxic fumes may be released in a fire. Use water spray to cool containers.
5.3 Advice for firefighters
Protection during firefighting
Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1.1 For non-emergency personnel
Emergency procedures
Evacuate area. Wear appropriate protective equipment. Contain spill and prevent entry into waterways.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up
Absorb with inert material and place in a chemical waste container. Dispose of in accordance with local regulations.
6.4 Reference to other sections
Reference
Not specified
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Precautions for safe handling
Avoid contact with skin and eyes. Use in a fume hood with appropriate PPE.
Hygiene measures
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 Conditions for safe storage, including any incompatibilities
Storage conditions
Store in a cool, dry, well-ventilated area away from heat sources and incompatible materials.
SECTION 8: Exposure controls/personal protection
8.2 Exposure controls
Hand protection
Protective gloves (e.g. nitrile rubber)
Eye protection
Chemical safety goggles or safety glasses
Skin and body protection
Wear suitable protective clothing
Respiratory protection
Use appropriate respiratory protection if ventilation is inadequate.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Physical state
Liquid
Colour
Colorless to pale yellow
Odour
Aromatic
Odour threshold
Not specified
pH value
Not specified
Relative evaporation rate (butylacetate=1)
Not specified
Melting point
-6 °C
Freezing point
Not specified
Boiling point
184 °C
Flash point
70 °C
Auto-ignition temperature
Not specified
Decomposition temperature
Not specified
Flammability (solid, gas)
Not applicable
Vapour pressure
0.6 mmHg at 20 °C
Relative vapour density at 20°C
3.2
Density
1.022 g/mL
Solubility
Soluble in water, alcohol, and ether
Log Pow
0.88
Viscosity, kinematic
Not specified
Viscosity, dynamic
Not specified
Explosive properties
Not explosive
Oxidising properties
Not oxidizing
Explosive limits
Not specified
SECTION 10: Stability and reactivity
10.1 Reactivity
Reactivity
Stable under normal conditions. Reacts with strong oxidizing agents.
10.2 Chemical stability
Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4 Conditions to avoid
Conditions to avoid
Avoid contact with incompatible materials and excessive heat.
10.5 Incompatible materials
Incompatible materials
Strong oxidizers, strong acids, and bases.
10.6 Hazardous decomposition products
Hazardous decomposition products
Not specified
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Acute toxicity
LD50 (oral, rat) 250 mg/kg.
Skin corrosion/irritation
Causes skin irritation.
Serious eye damage/irritation
Causes serious eye irritation.
Respiratory or skin sensitisation
May cause allergic skin reaction.
Germ cell mutagenicity
Not classified
Carcinogenicity
Not classified
Specific target organ toxicity (single exposure)
May cause damage to organs through prolonged or repeated exposure.
Specific target organ toxicity (repeated exposure)
Not classified
SECTION 12: Ecological information
12.1 Toxicity
Toxicity information
Not specified
12.2 Persistence - degradability
Persistence - degradability
Not specified
12.3 Bioaccumulative potential
Bioaccumulative potential
Not specified
12.4 Mobility in soil
Mobility in soil
Not specified
12.6 Other adverse effects
Environmental precautions
Not specified
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Additional Info
Dispose of contents/container in accordance with local, regional, national and international regulations.
SECTION 14: Transport information
14.1 UN number
UN-No. (ADR)
1547
UN-No. (IMDG)
1547
UN-No. (IATA)
1547
UN-No. (ADN)
1547
UN-No. (RID)
1547
14.2 UN proper shipping name
Proper Shipping Name (ADR)
Aniline
Proper Shipping Name (IMDG)
Aniline
Proper Shipping Name (IATA)
Aniline
Proper Shipping Name (ADN)
Aniline
Proper Shipping Name (RID)
Aniline
14.3 Transport hazard class(es)
Transport hazard class(es)
6.1
14.4 Packing group
Packing group (ADR)
II
Packing group (IMDG)
II
Packing group (IATA)
II
Packing group (ADN)
II
Packing group (RID)
II
14.5 Environmental hazards
Dangerous for the environment
Not specified
Marine pollutant
Not specified
Other information
No supplementary information available
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1 EU-Regulations
Not specified
SECTION 16: Other Information
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a guarantee or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.