Stannic Chloride Pentahydrate
Synonyms: Tin(IV) chloride pentahydrate
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Chemical Name
Stannic Chloride Pentahydrate
Product Form
Substance
Catalogue No.
AL01442
CAS Number
10026-06-9
EC Number
233-140-8
EC Index Number
233-140-8
Grade
98%
HSN Code
28273990
Molecular Formula
SnCl4·5H2O
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
Chemical Name
Stannic Chloride Pentahydrate
Catalogue No.
AL01442
Product form
Substance
CAS Number
10026-06-9
EC Number
233-140-8
Grade
98%
EC Index Number
233-140-8
Chemical Formula
SnCl4·5H2O
HSN Code
28273990
Synonyms
Tin(IV) chloride pentahydrate
Chemical Structure
-
1.2 Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture
Used as a Lewis acid catalyst and mordant in textile dyeing
Uses advised against
Not specified
1.3 Details of the supplier of the safety data sheet
Company identification
Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 Emergency Contact Details
Phone / e-Mail
Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
SECTION 2: Hazards identification
2.3 Other hazards
Other hazards
Corrosive to metals; may release toxic fumes when heated.
SECTION 3: Composition/information on ingredients
3.1 Substance
Name
Stannic Chloride Pentahydrate
CAS No.
10026-06-9
SECTION 4: First aid measures
4.1 Description of first aid measures
First-aid measures after inhalation
Move to fresh air. If symptoms persist, seek medical attention.
First-aid measures after skin contact
Wash with plenty of soap and water. Seek medical attention if irritation develops.
First-aid measures after eye contact
Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and seek medical attention.
First-aid measures after ingestion
Rinse mouth. Do NOT induce vomiting. Seek medical attention immediately.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms relating to use
Corrosive effects may include irritation, redness, and burns to skin and eyes; respiratory irritation if inhaled.
4.3 Indication of any immediate medical attention and special treatment needed
General information
Treat symptomatically. Show this safety data sheet to the treating physician.
SECTION 5: Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
Water spray, carbon dioxide, dry chemical powder, foam.
Unsuitable extinguishing media
Not specified
5.2 Special hazards arising from the substance or mixture
Special procedures
May emit toxic fumes of tin and hydrochloric acid upon combustion.
5.3 Advice for firefighters
Protection during firefighting
Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1.1 For non-emergency personnel
Emergency procedures
Evacuate area and ventilate. Wear appropriate protective equipment. Contain and collect spillage.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up
Neutralize with a suitable alkaline material and dispose of according to local regulations.
6.4 Reference to other sections
Reference
Not specified
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Precautions for safe handling
Use personal protective equipment. Avoid contact with skin and eyes. Ensure adequate ventilation.
Hygiene measures
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 Conditions for safe storage, including any incompatibilities
Storage conditions
Keep container tightly closed in a dry, cool, and well-ventilated place.
SECTION 8: Exposure controls/personal protection
8.2 Exposure controls
Hand protection
Protective gloves (e.g. nitrile rubber)
Eye protection
Chemical safety goggles or safety glasses
Skin and body protection
Wear suitable protective clothing
Respiratory protection
Use a suitable respirator if exposure limits are exceeded.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Physical state
Solid
Colour
White to pale yellow
Odour
Fuming, pungent
Odour threshold
Not applicable
pH value
Not applicable
Relative evaporation rate (butylacetate=1)
Not applicable
Melting point
30 °C (86 °F)
Freezing point
Not applicable
Boiling point
Not applicable
Flash point
Not applicable
Auto-ignition temperature
Not applicable
Decomposition temperature
> 100 °C
Flammability (solid, gas)
Not flammable
Vapour pressure
< 1 mmHg at 20 °C
Relative vapour density at 20°C
Not applicable
Density
1.73 g/cm³
Solubility
> 100 g/L in water
Log Pow
Not applicable
Viscosity, kinematic
Not applicable
Viscosity, dynamic
Not applicable
Explosive properties
Not explosive
Oxidising properties
Not oxidizing
Explosive limits
Not applicable
SECTION 10: Stability and reactivity
10.1 Reactivity
Reactivity
Reacts with water, releasing hydrochloric acid and forming tin oxides.
10.2 Chemical stability
Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4 Conditions to avoid
Conditions to avoid
Avoid contact with incompatible materials and excessive heat.
10.5 Incompatible materials
Incompatible materials
Strong bases, strong oxidizers, and moisture.
10.6 Hazardous decomposition products
Hazardous decomposition products
Not specified
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Acute toxicity
LD50 (oral, rat) > 2000 mg/kg.
Skin corrosion/irritation
Causes skin burns and irritation.
Serious eye damage/irritation
Causes serious eye damage.
Respiratory or skin sensitisation
Not a skin sensitizer.
Germ cell mutagenicity
Not classified
Carcinogenicity
Not classified
Specific target organ toxicity (single exposure)
May cause respiratory irritation.
Specific target organ toxicity (repeated exposure)
Not classified
SECTION 12: Ecological information
12.1 Toxicity
Toxicity information
Not specified
12.2 Persistence - degradability
Persistence - degradability
Not specified
12.3 Bioaccumulative potential
Bioaccumulative potential
Not specified
12.4 Mobility in soil
Mobility in soil
Not specified
12.6 Other adverse effects
Environmental precautions
Not specified
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Additional Info
Dispose of contents/container in accordance with local, regional, national and international regulations.
SECTION 14: Transport information
14.1 UN number
UN-No. (ADR)
UN 2440
UN-No. (IMDG)
UN 2440
UN-No. (IATA)
UN 2440
UN-No. (ADN)
UN 2440
UN-No. (RID)
UN 2440
14.2 UN proper shipping name
Proper Shipping Name (ADR)
Stannic Chloride, Pentahydrate
Proper Shipping Name (IMDG)
Stannic Chloride, Pentahydrate
Proper Shipping Name (IATA)
Stannic Chloride, Pentahydrate
Proper Shipping Name (ADN)
Stannic Chloride, Pentahydrate
Proper Shipping Name (RID)
Stannic Chloride, Pentahydrate
14.3 Transport hazard class(es)
Transport hazard class(es)
8
14.4 Packing group
Packing group (ADR)
III
Packing group (IMDG)
III
Packing group (IATA)
III
Packing group (ADN)
III
Packing group (RID)
III
14.5 Environmental hazards
Dangerous for the environment
Not specified
Marine pollutant
Not specified
Other information
No supplementary information available
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1 EU-Regulations
Not specified
SECTION 16: Other Information
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a guarantee or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.