Acetic Acid
- CAS Number
- -
- HSN Code
- 38229090
- Molecular Formula
- C2H4O2
- Catalogue Number
- AL01656
- Purity
- 99.7%
- Molecular Weight
- 60.05 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
This is a ready-to-use 1 mol/L (1N) acetic acid solution, standardized to a precisely known concentration for titrimetric work.
Also known as Ethanoic acid, Acetic acid solution.
- Catalogue No.
- AL01656
- CAS Number
- -
- Molecular Formula
- C2H4O2
- Molecular Weight
- 60.05 g/mol
- HSN Code
- 38229090
- Grade
- 1 mol/L (1N)
- Product Form
- Mixture
Clear, colorless aqueous solution with a vinegar-like odor. Density is approximately 1.01 g/cm³ at 20°C.
- Appearance
- Clear, colorless liquid
- Shelf Life
- 12 months when stored properly
- Packaging
- Available in 500 mL and 1 L bottles
- Storage
- Store in a cool, dry place away from incompatible materials.
1.1 — Product identifier
- Chemical Name
- Acetic Acid
- Catalogue No.
- AL01656
- Product form
- Mixture
- CAS Number
- Not applicable
- EC Number
- 200-580-7
- Grade
- 1 mol/L (1N)
- EC Index Number
- 607-002-00-6
- Chemical Formula
- C2H4O2
- HSN Code
- 38229090
- Synonyms
- Ethanoic acid, Acetic acid solution
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Used in titrations and quantitative analysis.
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.3 — Other hazards
- Other hazards
- None identified beyond standard handling precautions.
3.1 — Substance
- Name
- Acetic Acid
- CAS No.
- Not applicable
4.1 — Description of first aid measures
- First-aid measures after inhalation
- Move to fresh air. If symptoms persist, seek medical attention.
- First-aid measures after skin contact
- Wash with soap and water. If irritation occurs, seek medical attention.
- First-aid measures after eye contact
- Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. If irritation persists, seek medical attention.
- First-aid measures after ingestion
- Rinse mouth. Do not induce vomiting. Seek medical attention if symptoms occur.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- Mild irritation to skin, eyes, and respiratory tract.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Water spray, carbon dioxide, dry chemical powder, foam.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Combustible liquid; may produce toxic fumes in a fire.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Contain spill and absorb with inert material. Dispose of in accordance with local regulations.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Use appropriate protective equipment. Clean up spills immediately.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Use gloves and eye protection. Avoid contact with skin and eyes.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Store in a cool, dry place, away from heat and incompatible materials.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Chemical safety goggles or safety glasses
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Not required under normal conditions of use; use in well-ventilated areas.
9.1 — Information on basic physical and chemical properties
- Physical state
- Liquid
- Colour
- Colorless
- Odour
- Vinegar-like
- Odour threshold
- Not available
- pH value
- Approximately 2.4
- Relative evaporation rate (butylacetate=1)
- <1
- Melting point
- 16.6 °C
- Freezing point
- Not available
- Boiling point
- 118.1 °C
- Flash point
- 39 °C
- Auto-ignition temperature
- 400 °C
- Decomposition temperature
- Not available
- Flammability (solid, gas)
- Not applicable
- Vapour pressure
- 11.6 mmHg at 20 °C
- Relative vapour density at 20°C
- 1.07
- Density
- 1.01 g/cm³ at 20 °C
- Solubility
- Miscible with water, ethanol, and ether
- Log Pow
- -0.31
- Viscosity, kinematic
- Not available
- Viscosity, dynamic
- 0.89 mPa·s at 20 °C
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Not applicable
10.1 — Reactivity
- Reactivity
- Stable under normal conditions. Reacts with strong bases and oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Stable under recommended storage conditions.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- No dangerous reactions known under normal conditions of use.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong oxidizers, strong bases, and reactive metals.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- Not specified
11.1 — Information on toxicological effects
- Acute toxicity
- LD50 (oral, rat) 3310 mg/kg.
- Skin corrosion/irritation
- Mildly irritating to skin.
- Serious eye damage/irritation
- Causes serious eye irritation.
- Respiratory or skin sensitisation
- Not a skin sensitizer.
- Germ cell mutagenicity
- Not classified
- Carcinogenicity
- Not classified
- Specific target organ toxicity (single exposure)
- Not classified as a specific target organ toxicant.
- Specific target organ toxicity (repeated exposure)
- Not classified
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- Not assigned
- UN-No. (IMDG)
- Not assigned
- UN-No. (IATA)
- Not assigned
- UN-No. (ADN)
- Not assigned
- UN-No. (RID)
- Not assigned
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Not regulated
- Proper Shipping Name (IMDG)
- Not regulated
- Proper Shipping Name (IATA)
- Not regulated
- Proper Shipping Name (ADN)
- Not regulated
- Proper Shipping Name (RID)
- Not regulated
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- Not applicable
14.4 — Packing group
- Packing group (ADR)
- Not applicable
- Packing group (IMDG)
- Not applicable
- Packing group (IATA)
- Not applicable
- Packing group (ADN)
- Not applicable
- Packing group (RID)
- Not applicable
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
Used directly in titrations and other quantitative volumetric procedures requiring a precisely known acetic acid concentration.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL01656
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 60.05 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay (Purity) | 99.0% min | 99.7% |
| pH Value | 2.0 - 3.0 | 2.4 |
| Density | 1.00 - 1.02 g/cm³ | 1.01 g/cm³ |
| Moisture Content | <0.5% | 0.3% |
| Residue on Ignition | <0.1% | 0.05% |
| Related Substances | None detected | None detected |
The above product is expected to comply with 1 mol/L (1N) grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| 1 mol/L (1N) | 99.7% | 16.6 °C / 118.1 °C | <0.5% | <0.1% | None detected | Completely miscible with water. |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
