Hydrochloric Acid
- CAS Number
- -
- HSN Code
- 38229090
- Molecular Formula
- HCl
- Catalogue Number
- AL0808D
- Purity
- ≥ 99.0%
- Molecular Weight
- 36.46 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
Hydrochloric acid 1 mol/L (1N) for 500 mL solution is supplied in a convenient 2x2 ampoule set for preparing precise volumetric standards. It is a clear, colorless liquid concentrate that is highly corrosive and must be handled with care.
Also known as Muriatic Acid, Hydrogen Chloride Solution.
- Catalogue No.
- AL0808D
- CAS Number
- -
- Molecular Formula
- HCl
- Molecular Weight
- 36.46 g/mol
- HSN Code
- 38229090
- Grade
- 1 mol/L (1N)
- Product Form
- Mixture
The product is a clear, colorless liquid with a density of approximately 1.01 g/cm³. It is miscible with water and has a boiling point of about 110 °C.
- Appearance
- Clear, colorless liquid
- Shelf Life
- -
- Packaging
- 2x2 ampoule set
- Storage
- Store in a cool, dry place away from incompatible materials.
1.1 — Product identifier
- Chemical Name
- Hydrochloric Acid
- Catalogue No.
- AL0808D
- Product form
- Mixture
- CAS Number
- Not applicable
- EC Number
- 231-595-7
- Grade
- 1 mol/L (1N)
- EC Index Number
- 017-002-00-2
- Chemical Formula
- HCl
- HSN Code
- 38229090
- Synonyms
- Muriatic Acid, Hydrogen Chloride Solution
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Laboratory reagent, pH control, and titration.
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.3 — Other hazards
- Other hazards
- Corrosive to metals; may release hydrogen chloride gas upon contact with water.
3.1 — Substance
- Name
- Hydrochloric Acid
- CAS No.
- Not applicable
4.1 — Description of first aid measures
- First-aid measures after inhalation
- Move to fresh air. If symptoms persist, seek medical attention.
- First-aid measures after skin contact
- Wash skin with soap and water. Seek medical attention if irritation develops.
- First-aid measures after eye contact
- Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and seek medical attention.
- First-aid measures after ingestion
- Do not induce vomiting. Rinse mouth and seek medical attention immediately.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- Burning sensation, coughing, and respiratory distress upon inhalation; skin burns upon contact; eye damage.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Water spray, carbon dioxide, dry chemical powder, foam.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Non-flammable, but may release toxic fumes in a fire.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Evacuate area and ventilate. Neutralize spill with sodium bicarbonate or lime.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Absorb spill with inert material and place in a chemical waste container.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Use personal protective equipment. Avoid contact with skin and eyes. Work in a well-ventilated area.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Keep container tightly closed in a cool, dry place.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Chemical safety goggles or safety glasses
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use appropriate respiratory protection if ventilation is inadequate.
9.1 — Information on basic physical and chemical properties
- Physical state
- Liquid
- Colour
- Colorless
- Odour
- Pungent, acrid
- Odour threshold
- Not specified
- pH value
- <1
- Relative evaporation rate (butylacetate=1)
- Not specified
- Melting point
- -27 °C
- Freezing point
- Not specified
- Boiling point
- 110 °C
- Flash point
- Not applicable
- Auto-ignition temperature
- Not applicable
- Decomposition temperature
- Not specified
- Flammability (solid, gas)
- Not flammable
- Vapour pressure
- Approximately 20 mmHg at 20 °C
- Relative vapour density at 20°C
- 1.2
- Density
- 1.01 g/cm³
- Solubility
- Completely miscible with water
- Log Pow
- Not applicable
- Viscosity, kinematic
- Not specified
- Viscosity, dynamic
- Not specified
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Not applicable
10.1 — Reactivity
- Reactivity
- Reacts violently with strong bases and oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Stable under recommended storage conditions.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- No dangerous reactions known under normal conditions of use.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong bases, oxidizing agents, metals, and alkalis.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- Not specified
11.1 — Information on toxicological effects
- Acute toxicity
- HCl is corrosive and can cause severe burns; LD50 (oral, rat) is 700 mg/kg.
- Skin corrosion/irritation
- Causes severe skin burns and eye damage.
- Serious eye damage/irritation
- Causes serious eye damage.
- Respiratory or skin sensitisation
- Not a skin sensitizer.
- Germ cell mutagenicity
- Not classified
- Carcinogenicity
- Not classified
- Specific target organ toxicity (single exposure)
- May cause respiratory irritation.
- Specific target organ toxicity (repeated exposure)
- Not classified
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- 1789
- UN-No. (IMDG)
- 1789
- UN-No. (IATA)
- 1789
- UN-No. (ADN)
- 1789
- UN-No. (RID)
- 1789
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Hydrochloric Acid
- Proper Shipping Name (IMDG)
- Hydrochloric Acid
- Proper Shipping Name (IATA)
- Hydrochloric Acid
- Proper Shipping Name (ADN)
- Hydrochloric Acid
- Proper Shipping Name (RID)
- Hydrochloric Acid
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- 8
14.4 — Packing group
- Packing group (ADR)
- III
- Packing group (IMDG)
- III
- Packing group (IATA)
- III
- Packing group (ADN)
- III
- Packing group (RID)
- III
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
This hydrochloric acid solution is primarily used to prepare fresh, precisely standardized 1N HCl titrant solutions by dilution for volumetric analysis in laboratories.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL0808D
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 36.46 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay (HCl) | ≥ 99.0% | 99.5% |
| pH Value | <1 | 0.5 |
| Density | 1.01 g/cm³ | 1.01 g/cm³ |
| Appearance | Clear, colorless liquid | Clear, colorless liquid |
| Boiling Point | 110 °C | 110 °C |
The above product is expected to comply with 1 mol/L (1N) grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| 1 mol/L (1N) | ≥ 99.0% | -27 °C / 110 °C | Not more than 0.5% | Not more than 0.01% | None detected | Completely miscible with water |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
