Sulfuric Acid Solution
- CAS Number
- -
- HSN Code
- 38229090
- Molecular Formula
- H2SO4
- Catalogue Number
- AL2560A
- Purity
- 99.5% min
- Molecular Weight
- 98.08 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
Sulfuric acid 0.5mol/L (1N) solution is a diluted form of sulfuric acid, a strong mineral acid known for its high reactivity and ability to act as a dehydrating agent. This solution is supplied in a convenient 2x2 ampoule set, allowing for easy preparation of precise volumetric standards. When diluted to 500 mL with water, it provides a reliable 0.5mol/L (1N) concentration, making it suitable for various laboratory applications. The molecular weight of sulfuric acid is 98.08 g/mol, and it is widely used in analytical chemistry for titrations and other quantitative analyses.
Also known as Battery Acid, Oil of Vitriol.
- Catalogue No.
- AL2560A
- CAS Number
- -
- Molecular Formula
- H2SO4
- Molecular Weight
- 98.08 g/mol
- HSN Code
- 38229090
- Grade
- 0.5mol/L (1N)
- Product Form
- Mixture
The sulfuric acid solution is a clear, colorless liquid that is highly soluble in water. It has a density of approximately 1.01 g/cm³ at 20°C. The boiling point of sulfuric acid is around 337°C, while the freezing point is approximately 10°C for concentrated solutions. The solution is highly corrosive and can cause severe burns upon contact with skin or eyes. It has a pH value of less than 1, indicating its strong acidity. The solution is stable under normal conditions but should be stored in a cool, dry place away from incompatible materials.
- Appearance
- Clear, colorless liquid
- Shelf Life
- -
- Packaging
- 2x2 ampoule set
- Storage
- Store in a cool, dry place, away from incompatible materials.
1.1 — Product identifier
- Chemical Name
- Sulfuric Acid Solution
- Catalogue No.
- AL2560A
- Product form
- Mixture
- CAS Number
- Not applicable
- EC Number
- 231-639-5
- Grade
- 0.5mol/L (1N)
- EC Index Number
- 016-020-00-8
- Chemical Formula
- H2SO4
- HSN Code
- 38229090
- Synonyms
- Battery Acid, Oil of Vitriol
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Used as a titrant in volumetric analysis and for preparing standardized solutions.
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.3 — Other hazards
- Other hazards
- Corrosive to metals; may cause severe skin burns and eye damage.
3.1 — Substance
- Name
- Sulfuric Acid Solution
- CAS No.
- Not applicable
4.1 — Description of first aid measures
- First-aid measures after inhalation
- Move to fresh air. If symptoms persist, seek medical attention.
- First-aid measures after skin contact
- Wash skin thoroughly with soap and water. Remove contaminated clothing. Seek medical attention if irritation develops.
- First-aid measures after eye contact
- Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and seek medical attention.
- First-aid measures after ingestion
- Do not induce vomiting. Rinse mouth and seek medical attention immediately.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- Burning sensation, redness, and pain on contact with skin or eyes; respiratory distress if inhaled.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Water spray, carbon dioxide, dry chemical powder, foam.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Non-flammable, but can cause fire when in contact with organic materials.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Contain spill and absorb with inert material. Dispose of in accordance with local regulations.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Neutralize with a suitable base (e.g., sodium bicarbonate) and collect for disposal.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Wear appropriate personal protective equipment, including gloves and eye protection. Avoid contact with skin and eyes.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Store in a cool, dry place, in a tightly closed container, away from incompatible materials such as bases and organic compounds.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Chemical safety goggles or safety glasses
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use appropriate respiratory protection if ventilation is inadequate.
9.1 — Information on basic physical and chemical properties
- Physical state
- Liquid
- Colour
- Colorless
- Odour
- Odourless
- Odour threshold
- Not applicable
- pH value
- <1
- Relative evaporation rate (butylacetate=1)
- Not applicable
- Melting point
- Not applicable
- Freezing point
- 10°C (approx.)
- Boiling point
- 337°C
- Flash point
- Not applicable
- Auto-ignition temperature
- Not applicable
- Decomposition temperature
- Not applicable
- Flammability (solid, gas)
- Not applicable
- Vapour pressure
- Not applicable
- Relative vapour density at 20°C
- Not applicable
- Density
- 1.01 g/cm³
- Solubility
- Fully miscible with water
- Log Pow
- Not applicable
- Viscosity, kinematic
- Not applicable
- Viscosity, dynamic
- Not applicable
- Explosive properties
- Not applicable
- Oxidising properties
- Not applicable
- Explosive limits
- Not applicable
10.1 — Reactivity
- Reactivity
- Reacts violently with water and can release heat; reacts with bases and organic materials.
10.2 — Chemical stability
- Chemical stability
- Stable under recommended storage conditions.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- No dangerous reactions known under normal conditions of use.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong bases, organic materials, and reducing agents.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- Not specified
11.1 — Information on toxicological effects
- Acute toxicity
- Harmful if swallowed or inhaled; may cause severe burns.
- Skin corrosion/irritation
- Causes severe skin burns.
- Serious eye damage/irritation
- Causes serious eye damage.
- Respiratory or skin sensitisation
- Not a skin sensitizer.
- Germ cell mutagenicity
- Not classified
- Carcinogenicity
- Not classified
- Specific target organ toxicity (single exposure)
- May cause respiratory irritation.
- Specific target organ toxicity (repeated exposure)
- Not classified
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- Not assigned
- UN-No. (IMDG)
- Not assigned
- UN-No. (IATA)
- Not assigned
- UN-No. (ADN)
- Not assigned
- UN-No. (RID)
- Not assigned
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Sulfuric Acid Solution
- Proper Shipping Name (IMDG)
- Sulfuric Acid Solution
- Proper Shipping Name (IATA)
- Sulfuric Acid Solution
- Proper Shipping Name (ADN)
- Sulfuric Acid Solution
- Proper Shipping Name (RID)
- Sulfuric Acid Solution
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- Not classified as dangerous goods
14.4 — Packing group
- Packing group (ADR)
- Not applicable
- Packing group (IMDG)
- Not applicable
- Packing group (IATA)
- Not applicable
- Packing group (ADN)
- Not applicable
- Packing group (RID)
- Not applicable
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
This 0.5mol/L (1N) sulfuric acid solution is primarily used in laboratories for preparing fresh, standardized titrant solutions for volumetric analysis. It is essential in various chemical analyses, including acid-base titrations, where precise concentrations are crucial for accurate results. Additionally, it is utilized in the calibration of pH meters and other analytical instruments. Industries such as pharmaceuticals, environmental testing, and food and beverage also employ this solution for quality control and testing purposes.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL2560A
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 98.08 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay | 99.5% min | 99.7% |
| pH | <1 | 0.5 |
| Density | 1.01 g/cm³ | 1.01 g/cm³ |
| Moisture Content | 0.5% max | 0.3% |
| Related Substances | None detected | None detected |
The above product is expected to comply with 0.5mol/L (1N) grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| 0.5mol/L (1N) | 99.5% min | Not applicable | 0.5% max | Not applicable | None detected | Fully miscible in water |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
