Zinc AAS Standard Solution
- CAS Number
- -
- HSN Code
- 38229090
- Molecular Formula
- Zn(NO3)2
- Catalogue Number
- AL02596
- Purity
- 1000 mg/L Zn
- Molecular Weight
- 65.37 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
Zinc AAS Standard Solution is a certified reference solution specifically designed for the calibration of atomic absorption spectrophotometers (AAS) for the accurate determination of zinc concentrations. This solution contains zinc in the form of zinc nitrate, dissolved in a dilute nitric acid medium, ensuring stability and reliability for analytical applications. The solution is prepared to a concentration of 1000 mg/L, making it suitable for a variety of analytical tasks in laboratories. Its precise formulation allows for consistent results in quantitative analysis, making it an essential tool for laboratories involved in environmental monitoring, food safety, and clinical diagnostics.
Also known as Zinc Nitrate Solution.
- Catalogue No.
- AL02596
- CAS Number
- -
- Molecular Formula
- Zn(NO3)2
- Molecular Weight
- 65.37 g/mol
- HSN Code
- 38229090
- Grade
- 1000 mg/L in Nitric Acid
- Product Form
- Mixture
The Zinc AAS Standard Solution is a clear, colorless liquid with an acidic nature, characterized by a density of approximately 1.02 g/mL. It is soluble in water due to its ionic nature, and the solution exhibits a pH typically below 1, indicative of its acidic composition. The solution is stable under normal laboratory conditions, but care should be taken to avoid exposure to incompatible materials. The presence of nitric acid not only aids in the solubility of zinc but also helps to prevent precipitation of zinc salts during storage and use.
- Appearance
- Clear, colorless liquid
- Shelf Life
- Stable for 12 months when stored properly
- Packaging
- Available in 100 mL and 500 mL bottles
- Storage
- Store in a cool, dry place away from incompatible materials.
1.1 — Product identifier
- Chemical Name
- Zinc AAS Standard Solution
- Catalogue No.
- AL02596
- Product form
- Mixture
- CAS Number
- Not applicable
- EC Number
- Not applicable
- Grade
- 1000 mg/L in Nitric Acid
- EC Index Number
- Not applicable
- Chemical Formula
- Zn(NO3)2
- HSN Code
- 38229090
- Synonyms
- Zinc Nitrate Solution
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Calibration of atomic absorption spectrophotometers for zinc analysis
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.3 — Other hazards
- Other hazards
- Corrosive to metals
3.1 — Substance
- Name
- Zinc AAS Standard Solution
- CAS No.
- Not applicable
4.1 — Description of first aid measures
- First-aid measures after inhalation
- Move to fresh air. If symptoms persist, seek medical attention.
- First-aid measures after skin contact
- Wash with plenty of soap and water. If irritation develops, seek medical attention.
- First-aid measures after eye contact
- Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and seek medical attention.
- First-aid measures after ingestion
- Rinse mouth. Do NOT induce vomiting. Seek medical attention immediately.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- Corrosive effects may include irritation, redness, and burns to skin and eyes; respiratory irritation if inhaled.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Water spray, carbon dioxide, dry chemical powder, foam.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Non-flammable, but may emit toxic fumes in a fire.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Contain spill and absorb with inert material. Dispose of in accordance with local regulations.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Neutralize with a suitable alkaline material and absorb with inert material.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Use personal protective equipment (PPE) such as gloves and goggles. Avoid contact with skin and eyes.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Store in a cool, dry place, in a tightly closed container, away from incompatible materials.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Chemical safety goggles or safety glasses
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use appropriate respiratory protection if ventilation is inadequate.
9.1 — Information on basic physical and chemical properties
- Physical state
- Liquid
- Colour
- Colorless
- Odour
- Odourless
- Odour threshold
- Not applicable
- pH value
- < 1
- Relative evaporation rate (butylacetate=1)
- Not applicable
- Melting point
- Not applicable
- Freezing point
- Not applicable
- Boiling point
- Not applicable
- Flash point
- Not applicable
- Auto-ignition temperature
- Not applicable
- Decomposition temperature
- Not applicable
- Flammability (solid, gas)
- Not applicable
- Vapour pressure
- Not applicable
- Relative vapour density at 20°C
- Not applicable
- Density
- 1.02 g/mL
- Solubility
- Soluble in water
- Log Pow
- Not applicable
- Viscosity, kinematic
- Not applicable
- Viscosity, dynamic
- Not applicable
- Explosive properties
- Not applicable
- Oxidising properties
- Not applicable
- Explosive limits
- Not applicable
10.1 — Reactivity
- Reactivity
- Stable under normal conditions, but may react with strong bases and oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Stable under recommended storage conditions.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- No dangerous reactions known under normal conditions of use.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong bases, strong oxidizers, and reactive metals.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- Not specified
11.1 — Information on toxicological effects
- Acute toxicity
- Low toxicity; may cause irritation.
- Skin corrosion/irritation
- Causes skin irritation.
- Serious eye damage/irritation
- Causes serious eye damage.
- Respiratory or skin sensitisation
- Not a skin sensitizer.
- Germ cell mutagenicity
- Not classified
- Carcinogenicity
- Not classified
- Specific target organ toxicity (single exposure)
- May cause respiratory irritation.
- Specific target organ toxicity (repeated exposure)
- Not classified
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- UN 3264
- UN-No. (IMDG)
- UN 3264
- UN-No. (IATA)
- UN 3264
- UN-No. (ADN)
- UN 3264
- UN-No. (RID)
- UN 3264
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Corrosive liquid, acidic, inorganic, n.o.s. (Zinc Nitrate Solution)
- Proper Shipping Name (IMDG)
- Corrosive liquid, acidic, inorganic, n.o.s. (Zinc Nitrate Solution)
- Proper Shipping Name (IATA)
- Corrosive liquid, acidic, inorganic, n.o.s. (Zinc Nitrate Solution)
- Proper Shipping Name (ADN)
- Corrosive liquid, acidic, inorganic, n.o.s. (Zinc Nitrate Solution)
- Proper Shipping Name (RID)
- Corrosive liquid, acidic, inorganic, n.o.s. (Zinc Nitrate Solution)
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- 8
14.4 — Packing group
- Packing group (ADR)
- III
- Packing group (IMDG)
- III
- Packing group (IATA)
- III
- Packing group (ADN)
- III
- Packing group (RID)
- III
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
This standard solution is primarily used for the calibration of atomic absorption spectrophotometers, which are widely employed in laboratories for the quantitative analysis of zinc in various matrices. It is particularly useful in environmental testing for water quality assessment, where zinc levels must be monitored to comply with regulatory standards. Additionally, the solution finds applications in the food industry for analyzing zinc content in food products, as well as in clinical laboratories for determining zinc levels in biological samples, such as blood or urine, which can be critical for nutritional assessments.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL02596
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 65.37 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay (Zn) | 1000 mg/L ± 5% | 995 mg/L |
| pH | < 1 | 0.8 |
| Density | 1.02 g/mL ± 0.01 g/mL | 1.02 g/mL |
| Related Substances | None detected | None detected |
The above product is expected to comply with 1000 mg/L in Nitric Acid grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| 1000 mg/L in Nitric Acid | 1000 mg/L Zn | Not applicable | Not applicable | Not applicable | None detected | Completely soluble in water |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
